Epoxy Paints

Perfect adhesion to metal sheet, galvanized and aluminium surfaces. Used on any wood, metal and mineral surfaces exposed to water, seawater, chemicals and corrosion. Provides very good performance in applications of general industry, machine manufacturing, protection of metal and marine applications.

Density (gr/cm³, 25˚C): 1.56±6

Total Solids (wt%) : 83±3(105 to 110 ° C for 3 hours)

Viscosity (Cps, 25˚C) : 120± 5 KU

Gloss 60 º: Min. 90 gloss, glossy

Application: 6-7 m²/1 kg (paint+hardener/50 micron dry film thickness)

Application Temperature : 5 °C – 40 °C 6

Drying Time:

9(23 °C’de ve % 50 humidity)Touch dry : 5 hours The time needed between coats is minimum 24 hours. Chemical resistance is reached in 7 days.

Perfect adhesion to metal sheet, galvanized and aluminium surfaces. Used on any wood, metal and mineral surfaces exposed to water, seawater, chemicals and corrosion. Provides very good performance in applications of general industry, machine manufacturing, protection of metal and marine applications.

Density (gr/cm³, 25˚C): 1.56±6

Total Solids (wt%) : 83±3(105 to 110 ° C for 3 hours)

Viscosity (Cps, 25˚C) : 120± 5 KU

Gloss 60 º: Min. 90 gloss, glossy

Application: 6-7 m²/1 kg (paint+hardener/50 micron dry film thickness)

Application Temperature : 5 °C – 40 °C 6

Drying Time:

9 (23 °C’de ve % 50 humidity)Touch dry : 5 hours The time needed between coats is minimum 24 hours. Chemical resistance is reached in 7 days.

It adheres perfectly to metal, aluminium and galvanized surfaces. It provides high resistance against chemicals. It is specially used for general and machine manufacturing industries.

Density (gr/cm³, 25˚C): 1.09-1,11

Total Solids (wt%) : 100

(105 to 110 ° C for 3 hours)

Viscosity (Cps, 25˚C) : 77± 1 KU

Gloss 60 º: Min. 80 gloss, glossy

Application:7-8m²/1 kg(paint+hardener/40-50 micron dry film thickness)

Application Temperature : 5 °C – 40 °C

Drying Time:

9 (23 °C’de ve % 50 humidity)Touch dry : 5 hours The time needed between coats is minimum 24 hours. Chemical resistance is reached in 7 days.

Used as primer on any wood, metal and mineral surfaces exposed to water, seawater, chemicals and corrosion, and as anticorrosive primer on surfaces where high corrosion resistance is needed. Perfect adhesion to metal sheet, galvanized and aluminium surfaces. Provides very good performance in applications of general industry, machine manufacturing, protection of metal applications.

Density (gr/cm³, 25˚C): 1,58±0,05

Total Solids (wt%) : 84-86(105 to 110 ° C for 3 hours)

Viscosity (Cps, 25˚C) : 120 ± 5(Biuged BGD 186)

Glossy 60˚ : Max. 10 gloss

Dilution :  with Asal  epoxy paint thinner can be diluted at the rate of 10-15%.

Drying Time:

(At 23 °C, at relative humidity of %50) It completes touch drying in 2-3 hours and hard drying in 24 hours.